| 翻訳と辞書 |
| Hydraulic rescue tools ： ウィキペディア英語版 |
Hydraulic rescue tools
Hydraulic rescue tools are used by emergency rescue personnel to assist vehicle extrication of crash victims, as well as other rescues from small spaces. These tools include cutters, spreaders, and rams. They are popularly referred to in the English speaking Commonwealth nations and the US as the Jaws of Life, a trademark of Hurst Performance, Inc. The Jaws of Life were first used in 1963 as a tool to free race car drivers from their vehicles after crashes.
Hydraulic rescue tools are powered by a hydraulic pump, which can be hand-, foot-, or engine-powered, or even built into the tool. These tools may be either single-acting, where hydraulic pressure will only move the cylinder in one direction, and the return to starting position is accomplished using a pressure-relief valve and spring setup, or dual-acting, in which hydraulic pressure is used to both open and close the hydraulic cylinder.
==History==
The Hurst Rescue Tool was invented by that company's founder, George Hurst, after he viewed a stock car race accident in which it took workers over an hour to remove an injured driver from his car. That was about 1961 and the tool reached the prototype stage of development in 1971. Previously rescuers often used circular saws for vehicle extrication, but these suffered from several drawbacks. Saws can conduct sparks, which could start a fire, create loud sounds, stress the victim(s), and often cut slowly. Alternatively, rescuers could try to pry open the vehicle doors with a crowbar or Halligan bar, but this could compromise the stability of the vehicle, injure the victims further, or inadvertently trigger the airbags of the vehicle.
In comparison, hydraulic spreader-cutters are quieter, faster, stronger, and more versatile: they can cut, open, and even lift a vehicle. ''Jaws of Life'' is a now trademarked line of tools originally developed by Hurst Performance. Hurst Performance began to export parts to a European company, Zumro resQtec, to avoid import duty. Zumro resQtec was interested in developing these tools for use in auto racing, with resQtec targeting the European market and Hurst targeting the American market. The hydraulic spreader was originally developed in 1972 by Tim Smith and Mike Brick, who later developed a cutter and a hydraulic ram. When an occupant is trapped the tool is used to pry or cut the car to remove the occupant. It takes about two minutes to take the roof off a car. Mike Brick coined the phrase "Jaws of Life" after he observed people saying that their new device "snatched people from the jaws of death." Later Brick went on to develop a single rescue tool that could perform all the functions of rescue — push, pull, cut and spread. His patent for this unique design eventually led to the Phoenix Rescue tool, which incorporates his design to this day. Other manufacturers (including Holmatro and Lukas, amongst others) make equivalent tools.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Hydraulic rescue tools」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|